DOUGLASSVILLE, PA · TRUCK & TRAILER WELDING SERVICES

Welding & Fabrication

A cracked frame, a broken bracket, or equipment with nowhere to mount — our in-house welding and fabrication work is held to the same standard as the rest of the shop. Structural repairs built to spec, not just patched over to look fixed.

WHAT WE REPAIR

WELDING & FABRICATION WORK WE DO

From a structural frame repair to a one-off bracket — built to hold up, not just to look fixed.

Frame & Crossmember Repair

Cracked, bent or corroded frame rails and crossmembers welded back to structural spec, not just patched over.

Custom Bracket & Mount Fabrication

Custom brackets, mounts and supports fabricated for equipment, lighting or non-standard parts that don't come off a shelf.

Aluminum & Steel Welding

MIG and TIG welding across aluminum trailer bodies and steel truck frames — the right process for the right metal.

Deck & Flatbed Repair

Flatbed and step deck floor, stake pocket and rail welding, built to keep equipment secured and legal to haul.

Hitch & Coupling Fabrication

Custom pintle hitches, fifth wheel mounts and towing hardware fabricated and welded to handle real load.

Structural Damage Repair

Accident or corrosion damage repaired and reinforced to bring a truck or trailer back to road-legal condition.

A frame crack or a broken mount doesn’t fix itself, and a weak repair is worse than no repair at all — it just fails again under load. At Fulmen Garage in Douglassville, PA, our in-house welding and fabrication work is done to the same standard as the rest of the shop: structural spec, the right process for the metal, and a repair that’s actually built to last.

COMMON SYMPTOMS

SIGNS YOU NEED WELDING OR FABRICATION

Structural damage doesn’t heal on its own — and it usually gets more expensive the longer it’s ignored.

Visible cracks in a frame rail or crossmember

Rust-through or corrosion damage on the frame

Broken, bent or missing brackets and mounts

Damaged flatbed stake pockets or rails

Loose or cracked hitch or coupling hardware

Frame flex or unusual noise over bumps

Failed a frame or structural DOT inspection

Custom equipment that needs a mounting solution

PHOTOS

WELDING & FABRICATION IN OUR BAYS

BRANDS WE SERVICE

WELDING & FABRICATION COVERAGE ACROSS EVERY MAJOR DIESEL PLATFORM

Plus RAM and Ford light- and medium-duty trucks and vans, backed by our direct Mopar parts access.

READY TO SCHEDULE?

GET THAT FRAME REPAIRED RIGHT

Call us to book welding or fabrication work in Douglassville, PA and the surrounding area. Fleet accounts and roadside calls welcome.

(484) 943-3669

FAQ

WELDING & FABRICATION QUESTIONS

Can a cracked frame rail actually be repaired, or does it need to be replaced?

Most frame cracks can be properly welded and reinforced, depending on location and how far the damage has spread. A full rail replacement is rare and usually only comes up with severe accident damage or corrosion that’s compromised a long section.

Do you weld aluminum trailer bodies, or just steel truck frames?

Both. Aluminum and steel need different welding processes and filler material, and we run both MIG and TIG setups so the repair matches the metal instead of just being ‘good enough to hold.’

Can you fabricate a custom mount for equipment that doesn't have a standard bracket?

Yes — lighting, hydraulic equipment, toolboxes, generators and other non-standard gear regularly need a bracket built from scratch rather than bought off a shelf. We fabricate to fit your specific setup.

Will a welded frame repair pass a DOT inspection?

A proper structural weld repair is built to bring the frame back to spec, not just to look fixed. We repair with DOT compliance in mind, since a cosmetic patch that doesn’t hold up is a repeat problem.

How long does welding or fabrication work usually take?

A bracket or small crack repair can often be same-day. Larger frame repairs or custom fabrication jobs take longer depending on the scope — we’ll give you a real timeline once we’ve seen what’s needed.

How much does welding and fabrication work cost?

It depends entirely on the job — a small bracket is nothing like a full frame repair. We look at it first and give you a clear estimate before any cutting or welding starts.

CRACKED, BROKEN OR BENT? LET'S WELD IT RIGHT.

Book welding or fabrication work in Douglassville, PA — real structural repair, ASE-certified technicians, and a clear estimate before any work starts.